HeiTel CamDisc VG 2s, Quick Installation Manual

Page: 20 / 28

HeiTel Digital Video GmbH - Quick Installation Guide CamDisc VG 2s
20 CamDisc VG 2s
English
Normally c losed BS 8418
In the wiring variant Normally
closed BS 8418 with two
resistances a distinction is made
between three different states:
■ Not triggered : The figure shows
the safe state (not triggered) of the detector line or the control input.
■ Camera alarm : If the "Normally closed" contact is operated, a camera
alarm is activated.
■ Sabotage alarm : If the detector line is interrupted or shorted, a sabotage
alarm is activated.
Initial setup operation
Installation of CamControl LITE
The scope of delivery (see ”Included in delivery” on page 18) for your
CamDisc VG 2s includes the installation CD. Install CamControl LITE to
commission the device.
To operate the software, the user requires read/write rights on the receiver
PC (administrator rights).
Online help Using an installed Adobe Reader, there is a context-sensitive help available for
CamControl LITE ; you can call this up via the F1 key or using the Help
button.
Port A configuration After starting the
CamControl LITE software,
it may be necessary to modify
the settings for Port A . To do
this, select the Setup button
and in the Receiver options
dialogue window the option
Port A . Confirm the changes
made using OK .
Relevant changes:
USB c onne c tion from CamControl LITE to the devi c e
Driver installation For a USB connection, if required the corresponding driver must be installed
on your receiver PC. The driver can be found in the CamControl LITE
program directory, sub-directory \ Drivers . If necessary, please consult the
detailed information on driver installation from the CamControl LITE
software manual.
Establishing the
connection to the
device
Start CamControl LITE . Click on the Dial button and in the Transmitter
index dialogue window, select the entry USB Direct Connection . Establish
a connection to the device using Dial .
R
L
=R
T
=1,5 k
Ω
(±1%)
R
T
R
L
Control input
CamDisc VG 2s
Option Description
Network : Enable TCP/IP Enables TCP/IP connection (including USB direct connection) to the device
CAPI 2.0 : Enable CAPI 2.0 Enables CAPI (ISDN) connection to the device