3 Functions
6
Digital Governor Basic System PANDAROS II
3.2
Variation specific additional functions
3.2.1
Variation DC 6-01 (Standard Generator)
(refer to connection diagram DC 6-01)
The speed setpoint is realized with two push buttons: increase speed and decrease speed.
3.2.2
Variation DC 6-02 (Standard General)
(refer to connection diagram DC 6-02)
The speed setpoint is given by an analogue setpoint source (voltage source 0 … 5 V,
current 4 … 20 mA or potentiometer 5 k
) and one switch input for fixed speed.
3.2.3
Variation DC 6-03 (Extended Generator)
(refer to connection diagram DC 6-03)
The assignment of the function and the calibration of the inputs must be performed by
the customer themselves in this context. The following functions are also available, alt-
hough the limited number of inputs means that they cannot all be used simultaneously:
a)
Free configurability of inputs
Five digital inputs are available in total, up to three of which can also optionally be
configured as analogue inputs featuring 0 … 5 V or 4 … 20 mA if required.
b)
Speed offset selection
All analogue or digital control signals that are conventionally used on the market for
the purpose of generating a speed offset selection for a superordinate generator con-
trol may be applied. This naturally also includes signals from ComAp, Deapsea,
Deif, Kuhse, Stucke, etc. as well as analogue additional devices from Heinzmann.
c)
Communication with Heinzmann generator management DGM-02
If the corresponding parameter settings have been made, the digital generator man-
agement from Heinzmann (THESEUS DGM-02) can be connected via CAN bus.
d)
Idling speed
It is possible to switch to the idling speed for a warm-up or cool-down phase.
e)
P-range changeover
It is possible to switch between two different P-ranges.
f)
Speed range changeover
It is possible to switch between two different speed ranges.
