OPERATION
Projectile Hazard!
Ensure that workpiece is centerloaded and secure. Reduce risk of flying debris by carefully
following all operating instruction
.
Know your press and hazards associated with its use. Keep hands and feet from
bed area at all times.
1. Insert the support pins to desired height, then lower the bed frame using the winch until the cable is slack and the bed
frame is resting fully on the support pins.
2. If needed, place arbor plates on the bed frame (optional, not included).
3. Place workpiece on the bed frame, using every precaution necessary to ensure your safety and prevent property
damage.
4. Operate the pump:
a) Manual Pump: (model HW93300)
Close the release valve by turning it clockwise, and pump the handle to extend the cylinder ram. To retract, simply
open the release valve of pump.
b) Air Pump: (model HW93301)
Connect to suitable air supply, press on the foot pedal to extend the cylinder ram. To retract, simply press the
release valve by stepping on the raised, stirrup shaped portion of the foot pedal.
Note:
Never operate pump with hose disconnected from cylinder. If operated in this condition, the hydraulic hose and
connections become pressurized. This increases burst hazard.
5. Apply load to workpiece.
Do not overload the workpiece.
6. Stabilize workpiece in a manner which will not allow it to inadvertently fall from the bed once the load is removed.
7. Once cylinder has fully retracted, remove workpiece.
Note:
To protect your cylinder, do not continue to operate pump after cylinder plunger is fully extended or retracted.
MAINTENANCE
Please refer to cylinder and pump's manual for maintenance and how to
add/change hydraulic oil
. For best results,
change the oil once a year. Use only good quality hydraulic oil. We recommend HW93291 for manual and air pumps.
Lubrication
A periodic coating of light lubricating oil to pivot points and hinges will help to prevent rust and assure assemblies move
freely.
Storage
Depressurize the hydraulic system, disconnect the hydraulic hose and lower the bed frame to lowest position.
REPLACEMENT PARTS
(refer to page 7)
Not all components of the Press are replacement items, but are illustrated as covenient reference of location and position
in the assembly sequence. When ordering parts, give Model number, serial number and parts description. Call or write for
current pricing: Hein-Werner Customer Support, 10939 N. Pomona Ave. Kansas City, MO 64153; Tel:(816)891-6390;
[email protected]. For cylinder and pump service parts, please refer to BVA owner's manuals.
5
!
!
Risk of serious eye injury from projected or blown debris. Reduce risk by wearing safety goggles when working
with or around press.
Use only
manufacturer provided attachments and accessories! Ensure all cylinder attachments are securely
threaded into the cylinder. When using bearing punch and other adapters,
center the load on workpiece
.
