background image

1. 

Read through these instructions.

2. 

Keep these instructions on hand.

3. 

Notice all warnings.

4. 

Follow all instructions accordingly.

5. 

Clean only with dry soft cloth. Household cleaners and solvents can 

damage the finish on your device.

6. 

Do not block any ventilation openings. Install in accordance with the 

these instructions.

7. 

Do not install near any heat sources such as radiators, heat registers, 

stoves or other device that produce heat.

8. 

Do not use this device near water.

9. 

Warning: 

To reduce the risk of fire or electric shock, do not expose this 

device to rain or moisture.

10.  Do not expose device to dripping or splashing.

11.  Protect the attached cables from being walked on or pinched, par-

ticularly at plugs, convenience receptacles, and the point the exit the 

apparatus.

12.  Only use attachments/accessories specified by the manufacturer.

13.  Unplug this device during lightning storms or when unused for long 

periods of time.

14.  All servicing should be performed by qualified service personnel. Ser-

vicing is required when the device has been damaged in any way.

15.  The main plug should be easily available to disconnect the device.

16.  Operating temperature: 0°C to +50°C

17.  Operating relative humidity:  5% to 85% RH (no condensation) 

Important safety 

information

Dispose of the product properly at the 

end of its life. This is electronic waste 

and should be recycled accordingly. 

heimgard.com

Summary of Contents for 117575










Reviews: