Start-Up
20
Setting the temperature setpoint
The temperature range for the setpoint is automatically limited by
the temperature limits. It can be set to a maximum of 2 °C below the
upper temperature limit and 2 °C above the minimum temperature
limit.
In the case of a temperature setpoint or current temperature < 5
°C, the yellow LED on the device will light up. It warns you about the
possible incorrect use of the thermal fluid and resulting damage to the
device.
➜
Press the confirmation button.
➜
Use the arrow button to select the
submenu for entering the setpoint
“Set”.
➜
Set the desired temperature setpoint.
➜
Save the temperature setpoint with the
confirmation button.
Entered setpoint
If the temperature setpoint you have entered is outside of the defined
temperature limits, a warning signal will sound. The value will not be
saved.
Summary of Contents for Hei-CHILL
Page 90: ...Service 90...
Page 91: ......
