Bedienung
90
Programmzeile einfügen
➜
Rufen Sie das gewünschte Programm auf.
➜
Wählen Sie mit Hilfe der Pfeiltasten eine zu ändernden Programmzeile auf.
➜
Bestätigen Sie die Zeilen-Nummer mit der Taste „Select”.
✓
Unterhalb der Zeile wird eine freie Programmzeile eingefügt.
Programmzeile löschen
➜
Rufen Sie das gewünschte Programm auf.
➜
Wählen Sie mit Hilfe der Pfeiltasten die zu löschende Programmzeile auf.
➜
Bestätigen Sie die Zeilen-Nummer mit dem Softkey „lösch”.
✓
Die Zeile wird aus dem Programm entfernt.
Laufendes Programm ändern
✓
Sie befinden sich im Grundmenü.
✓
Drücken Sie den Softkey „„Prog.x/y”.
➜
Wählen Sie mit Hilfe der Pfeiltasten einen zu ändernden Programmparameter auf.
✓
Ganze Programmzeilen können im laufenden Betrieb nicht eingefügt oder gelöscht
werden.
➜
Bestätigen Sie den gewünschten Parameter mit der Taste „Select” und ändern Sie den
Wert.
➜
Ändern Sie gegebenenfalls weitere Parameter.und bestätigen Sie alle Änderungen mit
der Taste „Select”.
➜
Verlassen Sie das Programm mit em Softkey „ESC”.
Je kleiner die zulässige Toleranz programmiert wird, desto genauer
ist die Einhaltung der gewünschten Temperatur. Da bis zum Erreichen
einer Temperatur jedoch eine gewisse Zeit erforderlich ist, kann es bei
knappen Zeitangaben zu unerwünschten Verzögerungen kommen, da
der nächste Programmschritt erst nach Erreichen der gewünschten
Temperatur abgearbeitet wird.
Bei großen Temperatursprüngen und kurzen Zeitvorgaben sollte also
eine größere Toleranz zugelassen werden.
Die Dauer eines einzelnen Programmschrittes kann maximal 999
Stunden und 59 Minuten betragen. Längere Zeiten müssten auf
mehrere Programmschritte verteilt werden.
Programmdurchläufe festlegen
✓
Das Gerät ist eingeschaltet.
➜
Wählen Sie das Untermenü
„Programmgeber”.
➜
Wählen Sie eins der 5 Programme
„Programm n” aus.
➜
Wählen Sie den Menüpunkt
„Durchläufe”.
Summary of Contents for Hei-CHILL 3000
Page 118: ...Service 118...
Page 119: ......