HEIDENHAIN TNC 640, User Manual, Page: 878 / 948

MOD Functions | Configuring the HR 550FS wireless handwheel
20
878
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
Setting the transmission channel
If the wireless handwheel is started automatically, then the
control tries to select the transmission channel providing the best
transmission signal. Proceed as follows if you want to set the radio
channel yourself:
Press the
MOD
key to select the MOD function
Select the
Machine settings
menu
Select the configuration menu for the wireless handwheel:
Press the
SET UP WIRELESS HANDWHEEL
soft key
Click the
Frequency spectrum
tab
Click on the
Stop HW
button
The control stops the connection to the wireless handwheel and
determines the current frequency spectrum for all 16 available
channels.
Memorize the number of the channel with the least amount of
radio traffic (smallest bar)
Click the
Start handwheel
button to reactivate the wireless
handwheel
Click the
Properties
tab
Click on the
Select channel
button
The controls shows all available channel numbers
Click the number of the channel that the control has found to
have the least amount of radio traffic
To save the configuration and exit the configuration menu, press
the
END
button
Selecting the transmitter power
A reduction in transmission power decreases the range
of the wireless handwheel.
Press the
MOD
key to select the MOD function
Select the
Machine settings
menu
Select the configuration menu for the wireless handwheel:
Press the
SET UP WIRELESS HANDWHEEL
soft key
Click on the
Set power
button
The control displays the three available power settings. Click
on the desired setting.
To save the configuration and exit the configuration menu,
press the
END
button