HEIDENHAIN TNC 640, User Manual, Page: 657 / 948

Pallet Management | Pallet management
14
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
657
Processing pallet table
A machine parameter defines whether the control is to
execute the pallet table blockwise or continuously.
You can execute a pallet table as follows:
Switch to
Program run, full sequence
or
Program run, single block
operating mode
Press the
PGM MGT
key
If no pallet tables are visible:
Press the
SELECT TYPE
soft key
Press the
SHOW ALL
soft key
Select a pallet table with the arrow keys
Press the
ENT
key
Select the screen layout, if necessary
Execute with the
NC Start
key
To check the NC program content before execution, proceed as
follows:
Select pallet table
With the arrow keys, choose the NC program you would like to
check
Press the
OPEN THE PROGRAM
soft key
The control displays the selected NC program on
the screen.
Scroll through the NC program with the arrow
keys
Press the
END PGM PAL
soft key
The control returns to the pallet table.
A machine parameter defines how the control is to react
after an error.