HEIDENHAIN TNC 620, User Manual

Page: 428 / 521

HEROS functions | User administration
10
Configuring the user administration
If you used the
Remote Desktop Manager
to establish
private connections before user administration was
activated, these connections are no longer available after
the activation of user administration.
Save your private connections before activating user
administration.
Further information: "Remote Desktop Manager (option
133)", Page 370
User administration is inactive in the control's factory default setting.
This status is called
legacy mode
.
User administration needs to be configured before you can use it.
Perform the following steps for configuration:
1 Calling and activating user administration
2 Creating a
useradmin
user
3 Setting up a database
4 Creating further users
Further information: "Creating further users", Page 437
Calling user administration
Call user administration as follows:
Press the
DIADUR
key to open the
HEROS menu
menu
Select the
Settings
menu item
Select the
UserAdmin
menu item
The control opens the
User management
window.
You can exit the
User management
window after each
configuration step.
If you exit the
User management
window directly after
having activated user administration, the control will
prompt you for a restart once.
428
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022