HEIDENHAIN TNC 620, User Manual

Page: 394 / 521

HEROS functions | Window manager
10
Print
Print options:
Copying the file to be printed into the
PRINTER
drive:
The file to be printed is automatically forwarded to the default
printer and deleted from the directory after the print job has been
executed.
You may also copy the file into the printer sub-directory if you
wish to use a printer other than the default printer.
Using the FN 16: F-PRINT function
Printable files:
Text files
Graphic files
PDF files
State Reporting Interface
(option 137)
Introduction
With production lot sizes becoming ever smaller and products
becoming increasingly customized, systems for production data
acquisition are becoming increasingly important.
The operating resource data—as one of the most important parts
of production data acquisition—describe the states of an operating
resource along the time scale. For machine tools, the idle times and
run times as well as information about pending faults are recorded.
An evaluation per workpiece can also be made when the active NC
programs are additionally taken into account.
One of the most common applications of production data
acquisition is the determination of equipment effectiveness. Overall
Equipment Effectiveness (OEE) is a measure of a single piece of
equipment’s value added, providing rapid insight into a machine’s
productivity and losses.
With the SRI State Reporting Interface, HEIDENHAIN offers a simple
and reliable interface for acquiring the operating states of your
machine.
In contrast to other interfaces, SRI also provides historical
production data. Even if your company network is down for several
hours, your valuable production data will not be lost.
A buffer memory that contains 2x 10 000 entries is
available for storing the historical operating states. Each
entry corresponds to a status change.
394
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022