HEIDENHAIN TNC 620, User Manual

Page: 378 / 521

HEROS functions |
Remote Desktop Manager
(option 133)
10
Setting Meaning Input
Run during restart
Reboot the Windows computer when the control reboots. Effec-
tive only if the control is rebooted using the shutdown icon at
the bottom right in the taskbar or if it is rebooted as a result of a
change in the system settings (e.g. network settings).
Required
Run during switch-off
The Windows computer is switched off when the control shuts
down (no reboot). This is the standard scenario. Even the
END
key
will then no longer trigger a reboot.
Required
Entries in the
Advanced
options
area
Available only to authorized specialists Optional
Starting and stopping the connection
Once a connection has been configured, this connection is shown
as an icon in the
Remote Desktop Manager
window. When you
highlight a connection, the
Start the connection
and
Terminate
the connection
menu items become selectable.
If the desktop of the external connection or the external computer
is active, all inputs from the mouse and the alphabetic keyboard are
transmitted there.
When the HEROS 5 operating system is shut down, the control
automatically terminates all connections. Please note, however, that
only the connection is terminated, whereas the external computer or
the external system is not shut down automatically.
Further information: "Shutting down or restarting an external
computer", Page 376
Proceed as follows to switch between the third desktop and the
control interface:
Use the right DIADUR key on the alphabetic keyboard
Use the taskbar
Use the operating mode key
378
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022