HEIDENHAIN TNC 620, User Manual

Page: 262 / 521

Testing and running | Skipping NC blocks
6
Positioning w/ Manual Data Input
Application
In order to skip NC blocks in the
Positioning w/ Manual
Data Input
operating mode, you need an alphabetic
keyboard.
In
Positioning w/ Manual Data Input
operating mode, you can
have the control skip NC blocks that have been marked corre-
spondingly. Proceed as follows:
Set the
HIDE
soft key to
ON
The control skips the NC blocks.
Set the
HIDE
soft key to
OFF
The control runs the NC blocks.
Procedure
To hide NC blocks in the
Positioning w/ Manual Data Input
operating mode, proceed as follows:
Select the desired NC block
Press the
/
key on the alphabetic keyboard
The control inserts a slash (
/
).
To show NC blocks again in the
Positioning w/ Manual Data
Input
operating mode, proceed as follows:
Select the hidden NC block
Press the
Backspace
key
The control removes the slash (
/
).
262
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022