manualshive.com logo in svg

HEIDENHAIN TNC 620, User Manual

Share
Download
HEIDENHAIN TNC 620 User Manual Download Page 260

Testing and running | Optional program-run interruption

6

6.6

Optional program-run interruption

Application

Refer to your machine manual.
The behavior of this function varies depending on the

respective machine.

The control optionally interrupts program run at NC blocks in which

an M1 has been programmed. If you use M1 in the 

Program run

operating mode, the control does not switch off the spindle or the

coolant.

Set the 

M01

 soft key to 

OFF

The control does not interrupt the 

Program run

 or

Test Run

 at NC blocks that contain an M1.

Set the 

M01

 soft key to 

ON

The control interrupts the 

Program run

 or 

Test

Run

 at NC blocks with M1.

260

HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022

Summary of Contents for TNC 620










































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands