HEIDENHAIN TNC 620 Programming Station, User Manual

Page: 80 / 695

Introduction
2.2 Visual display unit and operating panel
2
80
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Set screen layout
You select the screen layout yourself: In the
Programming
mode,
for example, you can have the TNC show program blocks in the left
window while the right window displays programming graphics.
You could also display the program structure in the right window
instead, or display only program blocks in one large window. The
available screen windows depend on the selected operating mode.
Set up screen layout:
Press the screen switchover key: The soft key row
shows the available layout options
Further Information: "Modes of operation",
page 81
Select the desired screen layout with a soft key
Control panel
The TNC 620 is delivered with an integrated operating panel. As
an alternative, the TNC 620 is also available with a separate display
unit and an operating panel with an alphabetic keyboard.
1 Alphabetic keyboard for entering texts and file names, as well
as for ISO programming
2
File management
Calculator
MOD function
HELP function
3 Programming modes
4 Machine operating modes
5 Initiating programming dialogs
6 Navigation keys and
GOTO
jump command
7 Numerical input and axis selection
8 Touchpad
9 Mouse buttons
10 Machine operating panel
More information Machine manual
The functions of the individual keys are described on the inside
front cover.
Some machine tool builders do not use the standard
HEIDENHAIN operating panel. Refer to your machine
manual.
External keys, e.g.
NC START
or
NC STOP
, are
described in your machine manual.
2
3 4
5
6
7
2
3 4
5
8
9
6
7
10
1