HEIDENHAIN TNC 620 Programming Station, User Manual

Page: 424 / 695

Special functions
11.6 Freely definable tables
11
424
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
In a table that already contains lines you can not
change the table properties
Name
and
Column type
.
Once you have deleted all lines, you can change
these properties. If required, create a backup copy of
the table beforehand.
In a field of the
TSTAMP
column type you can reset
an invalid value if you press the
CE
key and then the
ENT
key.
Exiting the structure editor
Press the
OK
soft key The TNC closes the editor form and
applies the changes. All changes are discarded by pressing the
CANCEL
soft key.
Switching between table and form view
All tables with the
.TAB
extension can be opened in either list view
or form view.
Press the key for setting the screen layout. Select
the respective soft key for list view or form view
(form view: with or without dialog texts)
In the form view the TNC lists the line numbers with the contents
of the first column in the left half of the screen.
In the right half you can change the data.
Press the
ENT
key or the arrow key to move to the next entry
field
To select another line press the navigation key (folder symbol).
This moves the cursor to the left window, and you can select
the desired line with the arrow keys. Press the green navigation
key to switch back to the input window.