HEIDENHAIN TNC 620 Programming Station, User Manual

Page: 416 / 695

Special functions
11.3 Active Chatter Control ACC (option 145)
11
416
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Activating/deactivating ACC
To activate ACC, you first need to set the
ACC
column to
Y
(
ENT
key = Y,
NO ENT
= N) for the respective tool in the tool table
TOOL.T.
Activate/deactivate ACC for the machine mode:
Operating mode: Press the
Program run,
full sequence
,
Program run, single block
or
Positioning with manl.data input
key
Shift the soft-key row
Activate ACC: Set the soft key to
ON
and the TNC
displays the ACC symbol in the position display
Further Information: "Status displays", page 84
To deactivate ACC: Set the soft key to
OFF
If ACC is on, in the position display the TNC shows the symbol .