HEIDENHAIN TNC 620 E, User Manual

Page: 626 / 840

Manual Operation and Setup | Moving the machine axes
16
626
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Incremental jog positioning
With incremental jog positioning you can move a machine axis by a
preset distance.
Operating mode: Press the
Manual operation
or
Electronic handwheel
key
Shift the soft-key row
Select incremental jog positioning: Switch the
INCREMENT
soft key to
ON
Enter the infeed of the
linear axes
and confirm
with the
CONFIRM VALUE
soft key
Alternatively, confirm with the
ENT
key
Use the arrow keys to position the cursor on the
rotary axis
Enter the infeed of the
rotary axes
and confirm
with the
CONFIRM VALUE
soft key
Alternatively, confirm with the
ENT
key
Confirm with the
OK
soft key
The increment is active.
Deactivate incremental jog positioning: Switch
the
INCREMENT
soft key to
OFF
If you are in the
Jog increment
menu, you can switch
off incremental jog positioning with the
SWITCH OFF
soft key.
The input range for the infeed is from 0.001 mm to
10 mm.