HEIDENHAIN TNC 620 E, User Manual

Page: 563 / 840

Multiple-Axis Machining | Inclined-tool machining in a tilted plane (option 9)
13
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
563
13.3 Inclined-tool machining in a tilted plane
(option 9)
Function
In combination with
M128
and the new
PLANE
functions, inclined-
tool machining on a tilted machining plane is now possible. Two
possibilities are available for definition:
Inclined-tool machining via incremental traverse of a rotary axis
Inclined-tool machining via normal vectors
Inclined-tool machining in a tilted machining plane only
works with spherical cutters. If you are using 45° swivel
heads and tilting tables, you can also define the incline
angle as a spatial angle. Use
FUNCTION TCPM
for this
purpose.
Further information: "FUNCTION TCPM (option 9)",
page 573
Inclined-tool machining via incremental traverse of a
rotary axis
Retract the tool
Define any PLANE function; consider the positioning behavior
Activate M128
Via a straight-line block, traverse to the desired incline angle in
the appropriate axis incrementally
Example
...
12 L Z+50 R0 FMAX
Position at clearance height
13 PLANE SPATIAL SPA+0 SPB-45 SPC+0 MOVE DIST50
F1000
Define and activate the PLANE function
14 M128
Activate M128
15 L IB-17 F1000
Set the incline angle
...
Define machining in the tilted working plane