HEIDENHAIN TNC 620 E, User Manual

Page: 300 / 840

Programming Contours | Path contours – Polar coordinates
7
300
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
7.5 Path contours – Polar coordinates
Overview
With polar coordinates you can define a position in terms of its
angle
PA
and its distance
PR
relative to a previously defined pole
CC
.
Polar coordinates are useful with:
Positions on circular arcs
Workpiece drawing dimensions in degrees, e.g. bolt hole circles
Overview of path functions with polar coordinates
Path function key Tool movement Required input Page
+ Straight line Polar radius, polar angle of the
straight-line end point 301
+ Circular path around circle
center/pole to arc end point Polar angle of the arc end point,
direction of rotation 302
+ Circular arc with tangential
connection to the preceding
contour element Polar radius, polar angle of the
arc end point 302
+ Combination of a circular and a
linear movement Polar radius, polar angle of the
arc end point, coordinate of the
end point in the tool axis 303