HEIDENHAIN TNC 620 E, User Manual

Page: 186 / 840

Fundamentals, File Management | Working with the file manager
4
186
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Displaying and editing Excel files
Proceed as follows to open and edit Excel files with the extension
xls
,
xlsx
or
csv
directly on the control:
To call the file manager, press the
PGM MGT
key.
Select the directory in which the Excel file is
saved
Move the cursor to the Excel file
Press the
ENT
key
The control opens the Excel file in its own
application using the
Gnumeric additional tool.
With the key combination ALT+TAB you can always
return to the control's user interface while leaving the
Excel file open. Alternatively, you can also click the
corresponding symbol in the task bar to switch back to
the user interface of the control.
If you position the mouse pointer over a button, a
brief tool tip explaining the function of this button will
be displayed. More information on how to use the
Gnumeric function is provided under
Help
.
Proceed as follows to exit Gnumeric :
Use the mouse to select the
File
menu item
Select
Close
The control returns to the file management.
If you are not using a mouse, proceed as follows to close the
additional
Gnumeric tool:
Press the key for switching the soft keys
The Gnumeric additional tool opens the
File
pull-
down menu.
Move the cursor to the
Close
menu item
Press the
ENT
key
The control returns to the file management.