HEIDENHAIN TNC 620 E, User Manual

Page: 137 / 840

Operating the Touchscreen | Functions in the taskbar
3
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
137
Touchscreen Calibration
With the
Touchscreen Calibration
function you can measure and
correct the screen.
Calibrating the touchscreen
Proceed as follows to conduct the functions:
or the
menu
icon to open the HeROS menu
Select the
Touchscreen Calibration
menu item
The control starts the calibration mode.
Successively tap on the blinking symbols
If you would like to stop the calibration:
Wait until the screen switches again or press
ESC
on the
connected keyboard
Touchscreen Configuration
With the
Touchscreen Configuration
function you can define the
properties of the screen.
Adjusting sensitivity
Proceed as follows to adjust the sensitivity:
or the
menu
icon to open the HeROS menu
Select the
Touchscreen Configuration
menu item
The control opens a pop-up window.
Select the sensitivity
Confirm with
OK
Display of the touch points
Proceed as follows to show or hide the touch points:
Press the
DIADUR
key to open the JH menu
Select the
Touchscreen Configuration
menu item
The control opens a pop-up window.
Select the
Show Touch Points
display
Disable Touchfingers
to hide the touch points
Enable Single Touchfinger
to show the touch point
Enable Full Touchfingers
to show the touch points of all
fingers involved
Confirm with
OK