HEIDENHAIN TNC 426, User Manual

Page: 109 / 502

HEIDENHAIN TNC 426, TNC 430 83
4.12 P
a
llet Manag
e
ment
Screen layout for executing pallet tables
You can have the TNC display the program contents and pallet file
contents on the screen together by selecting the screen layout PGM
+ PALLET. During execution, the TNC then shows program blocks to
the left and the pallet to the right. To check at the program contents
before execution, proceed as follows:
U Select a pallet table.
U With the arrow keys, choose the program you would like to check.
U Press the OPEN PGM soft key: The TNC displays the selected
program on the screen. You can now page through the program with
the arrow keys.
U To return to the pallet table, press the END PGM soft key.