HEIDENHAIN TNC 320, User Manual

Page: 96 / 581

Programming: Fundamentals, file management
3.2 Opening programs and entering
3
96
TNC 320 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
Finding any text
Select the search function: Press the
FIND
soft key. The TNC
displays the Find text: dialog prompt
Enter the text that you wish to find
To find the text, Press the
FINDRUN soft key
Marking, copying, deleting and inserting program sections
The TNC provides certain functions for copying program sections
within an NC program or into another NC program—see the table
below.
To copy a program section, proceed as follows:
Select the soft-key row containing the marking functions
Select the first (last) block of the section you wish to copy
To mark the first (last) block, press the
SELECT BLOCK soft key.
The TNC then highlights the first character of the block and the
CANCEL SELECTION soft key appears
Move the highlight to the last (first) block of the program section
you wish to copy or delete. The TNC shows the marked blocks
in a different color. You can end the marking function at any time
by pressing the
CANCEL SELECTION soft key
To copy the selected program section, press the
COPY BLOCK
soft key. To delete the selected section, press the DELETE
BLOCK
soft key. The TNC stores the selected block
Using the arrow keys, select the block after which you wish to
insert the copied (deleted) program section
To insert the section into another program, select the
corresponding program using the file manager and
then mark the block after which you wish to insert
the copied block.
To insert the block, press the
INSERT BLOCK
soft key
To end the marking function, press the Cancel selection soft
key