HEIDENHAIN QUADRA-CHEK 2000 Demo, User Manual

Page: 59 / 92

Quick Start | Conducting a measurement
5
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
59
Changing the
Fitting algorithm
You can adjust the fitting algorithm depending on the measured feature. The
Gaussian fitting algorithm is used by default.
Move a feature (e.g., a
Circle
) from the features list into the
workspace
The
Details
dialog appears with the
Overview
tab selected
The fitting algorithm used is shown in the
Fitting algorithm
drop-down list
In the
Fitting algorithm
drop-down list, select the desired
fitting algorithm (e.g.,
Min. circumscribed
)
The feature is displayed according to the selected fitting
algorithm
Figure 22:
Circle
feature with new fitting algorithm
Tap
Close
to close the dialog