HEIDENHAIN QUADRA-CHEK 2000 Demo, User Manual

Page: 21 / 92

Basic Operation | General operating elements and functions
3
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
21
3.3 General operating elements and functions
The operating elements described below are available for configuration and
operating the product via the touchscreen or input devices.
Screen keyboard
With the screen keyboard, you can enter text into the input fields of the user
interface. The displayed screen keyboard is either numeric or alphanumeric,
depending on the input field.
To enter values, tap an input field
The input field is highlighted
The screen keyboard is displayed
Enter text or numbers
In some input fields, a green check mark indicates that the entry is correct
If the entry is incomplete or incorrect, a red exclamation mark is displayed. The
entry cannot be concluded in this case
To apply the values, confirm the entry with
RET
The values are displayed
The screen keyboard disappears
Input fields with plus and minus buttons
To adjust a numerical value, use the
+
(plus) and
–
(minus) buttons to the left and
right of the numerical value.
Tap
+
or
–
until the desired value is displayed
Long-press
+
or
–
to scroll through the values more
quickly
The selected value is displayed
Toggle switch
Use the toggle switch to switch between functions.
Tap the desired function
The active function is shown in green
The inactive function is shown in light gray
Slide switch
With the sliding switch, you can activate or deactivate a function.
Drag the sliding switch to the desired position or tap the
sliding switch
The function is activated or deactivated
Slider
With the slider, you can continuously adjust values.
Drag the slider to the desired position
The selected value is displayed graphically or in percent