HEIDENHAIN QUADRA-CHEK 2000 Demo, User Manual

Page: 19 / 92

Basic Operation | Using the touchscreen and input devices
3
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
19
3.2.2 Gestures and mouse actions
To activate, switch or move the operating elements of the user interface, you can
use QUADRA-CHEK 2000 Demo's touchscreen or a mouse. Gestures are used to
operate the touchscreen and the mouse.
The gestures for operating the touchscreen may differ from the
gestures for operating the mouse.
If the gestures for operating the touchscreen differ from those for
operating the mouse, then these instructions describe both operating
options as alternative actions.
The alternative actions for operating the touchscreen or the mouse are
identified by the following symbols:
Operation using the touchscreen
Operation using the mouse
The following overview describes the different gestures for operating the
touchscreen or the mouse:
Tapping
Means touching the screen briefly with your fingertip
Means pressing the left mouse button once
The actions initiated by tapping include
Selection of menus, features or parameters
Entering characters with the screen keyboard
Closing dialogs
Displaying and hiding the main menu in the
Measure
menu
Displaying and hiding the Inspector in the
Measure
menu
Holding
Means touching the screen and holding your finger(s) on it for a
few seconds
Means pressing the left mouse button once and holding it
down
The actions initiated by holding are
Quickly changing the values in input fields with plus and
minus buttons