HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 40 / 250

General information | Basic operation
I
Setting the units of measure
Before you start measuring, you need to set the desired units of measure in the
quick access menu.
Tap the
quick access menu
on the function bar
Select the desired
Unit for linear values
Select the desired
Unit for angular values
To close the quick access menu, tap
Close
The selected units are displayed in the
quick access menu
3.12 Messages and audio feedback
3.12.1 Messages
1
2
Figure 8: Display of messages in the workspace
1 Message display area; displays the time and the number of unclosed messages
2 Message list
The messages that appear at the top of the workspace are triggered by, for example,
operator errors or uncompleted processes.
The messages are displayed upon occurrence of the message cause or via tapping
on the
Messages
display area at the top left of the screen.
Viewing messages
3
Tap
Messages
The message list opens
Resizing the display area
To enlarge the message display area, drag the
handle
down
To make the message display area smaller, drag the
handle
up
To close the display area, drag the
handle
up out of the screen
The number of unclosed messages is indicated in
Messages
40
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022