HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual, Page: 218 / 250

Information for the Operator user | Relative measurement
III
8 Relative measurement
8.1 Configuring the
Relative
function
The
Relative
function allows you to measure independently of the selected preset.
When the
Relative
function is active, you can zero axes and perform measurements,
for example, without these actions affecting the selected preset. When you
deactivate the
Relative
function, all of the position values and measuring steps are
once again referenced to the selected preset.
You can activate and deactivate this function by tapping the
Relative
function
element on the function bar.
Adding a function element
Tap
Measure
in the main menu
Drag an empty function bar field to the left and into the
workspace
A dialog box for selecting the function element appears
Tap the
Relative
function element
Tap
Close
The
Relative
function element is now available
218
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022