HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 182 / 250

Information for OEM and Setup users | Servicing and maintenance
II
8.7.3
Restoring settings
Backed-up settings can be restored to the product. The current configuration of the
product is replaced in the process.
Software options that were active when the settings were backed up
must be activated before restoring the settings.
A restore can be necessary in the following cases:
During commissioning, the settings are set on a product and transferred to all
identical products
Further information: "Steps for commissioning", Page 75
After a reset, the settings are copied back to the product
Further information: "Reset all settings", Page 183
Settings
►
Service
►
Back up and restore
Parameter Explanation
Restoring settings
Restoring of the backed up settings
Restoring settings
Tap
Complete restoration
If required, connect a USB mass storage device (FAT32
format) to a USB port on the product
Navigate to the folder containing the backup file
Select the backup file
Tap
Select
Confirm the successful transfer with
OK
The system is shut down
To restart the product with the transferred configuration data,
switch the product off and then back on
Safely removing a USB mass storage device
Tap
File management
in the main menu
Navigate to the list of storage locations
Tap
Safely remove
The message
"The storage medium can be removed now."
appears
Disconnect the USB mass storage device
182
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022