HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual, Page: 133 / 250

Information for OEM and Setup users | Setup
RS-232
Settings
►
Interfaces
►
RS-232
►
X32
The parameters of the
RS-232
adapter are output.
Parameter Explanation
Baud rate
Configuration of the transfer rate
Setting range:
1 ... 115200
Data bits
Selection of the number of data bits
Settings:
5 bits
6 bits
7 bits
8 bits
Parity
Selection of the parity bit for verification
Settings:
None
Even
Odd
Space
Mark
Stop bits
Selection of the stop bit for synchronization
Settings:
1 bit
2 bits
Flow control
Selection of the data flow
Settings:
None
Hardware
Xon/Xoff
Selecting a data format
By assigning a data format to the functions for the measured value output, you
specify the format in which the measured values will be sent to the computer. For
this purpose, you can use the
Standard
and
Steinwald
data formats, or create your
own data format (see "Creating your own data format", Page 137).
II
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
133