HEIDENHAIN GAGE-CHEK 2000 Series Operating Instructions Manual Download

Page: 36 / 236

Mounting | Overview

4.1

Overview

This chapter describes the mounting of the product. It contains instructions about

how to correctly mount the product on stands or holders.

The following steps must be performed only by qualified personnel.

Further information:

"Personnel qualification", Page 25

4.2

Assembly of the product

General mounting information

The mount for the mounting variants is provided on the rear panel. The mounting

hole pattern corresponds to a grid of 50 mm x 50 mm.

Figure 1: Dimensions of rear panel of the product

The materials for attachment of the mounting variants on the device are included in

delivery.
You will also need the following:

Torx T20 screwdriver
Torx T25 screwdriver
Allen key, size 2.5 (Duo-Pos stand)
Materials for mounting on a supporting surface

The unit must be mounted to a stand or a holder to ensure the correct

and intended use of the product.

HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020

Summary of Contents for GAGE-CHEK 2000 Series













































































































































































































































Search results

Summary of Contents for GAGE-CHEK 2000 Series

Reviews:

Related manuals for GAGE-CHEK 2000 Series

Brands by name

Popular brands

HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Search results

Summary of Contents for GAGE-CHEK 2000 Series

Reviews:

Related manuals for GAGE-CHEK 2000 Series

Brands by name

Popular brands