HEIDENHAIN GAGE-CHEK 2000 Series Operating Instructions Manual Download Page 30

Page: 30 / 236

Transport and storage | Overview

3.1

Overview

This chapter contains information on the transportation and storage of the product

and provides an overview of the items supplied and the available accessories for

the product.

The following steps must be performed only by qualified personnel.

Further information:

"Personnel qualification", Page 25

3.2

Unpacking

Open the top lid of the box
Remove the packaging materials
Unpack the contents
Check the delivery for completeness
Check the delivery for damage

3.3

Items supplied and accessories

3.3.1

Items supplied

The following items are included in delivery:

Name

Description

Addendum (optional)

Supplements or supersedes the contents of

the Operating Instructions and, if applicable,

of the Installation Instructions.

Operating Instructions

PDF issue of the Operating Instructions on

a memory medium in the currently available

languages

Product

Evaluation Unit GAGE-CHEK 2000

Installation Instructions

Printed issue of the Installation Instructions

in the currently available languages

HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020

Summary of Contents for GAGE-CHEK 2000 Series













































































































































































































































Search results

Summary of Contents for GAGE-CHEK 2000 Series

Reviews:

HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual, Page: 30 / 236

Search results

Summary of Contents for GAGE-CHEK 2000 Series

Reviews: