HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Page: 195 / 236

Settings |
Axes
Parameter Explanation
Spacing of the supporting points Spacing of the compensation points on the axes ( X and Y )
Setting range: 0.00001 mm ... 100.00000 mm ( X and Y )
Default value:
1.00000 mm
(
X
and
Y
)
Read deviations of calibration
standard
A file containing the deviations of the calibration standard is read
Import table of supporting points
Uploading a file
in .txt-format with position information regarding the
supporting points
in .xml format with position information regarding the
supporting points and the deviations of the calibration
standard
Export table of supporting points A file containing the position indications of the supporting points
and the deviations of the calibration standard is saved
Table of supporting points Opens the table of supporting points for manual editing
11.6.5
Squareness error compensation (SEC)
Path: Settings
►
Axes
►
General settings
►
Error compensation
►
Squareness error compensation (SEC)
Parameter Explanation
XY plane
XZ Plane
YZ plane Mechanical influences on the squareness of the axes relative to
each other are compensated
Setting range:
85° ... 95°
Default value: 90
11.6.6
Alias assignment for axis names
Path:
Settings ► Axes ► General settings ► Alias assignment for axis names
You can assign new axis names for the following axes: C1, C2, and C3. The
respective axis name is a two-digit numerical value, a two-character combination of
letters, or a two-character combination of a numerical value and a letter.
Parameter Explanation
C1
C2
C3
Setting range:
00 ... 99
and
aA ... xX
Default value: X (for C1)
Default value:
Y
(for C2)
Default value: Z (for C3)
11
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
195