HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Page: 146 / 236

Setup | Single steps for setup
8
Data output in the data format Steinwald
Figure 25: Example of a transfer for the X and Y axes with the active MinMax function in the
data format Steinwald
Example: X MIN 19.987 mm
START
<CR> <LF>
Start of the transfer block
2020-07-29 T07:49:16.008
<CR> <LF>
Date in
yyyy-mm-dd
Time in
hh:mm:ss.f
X MIN 19 . 987 mm <CR> <LF>
1 2 3 4 5 6 7 8 9
END <CR> <LF>
End of the transfer block
1 Axis name
2 Function (MIN, MAX, RANGE)
3 Algebraic sign (< 0, then minus sign)
4 Digits before the decimal point
5 Decimal point
6 Digits after the decimal point
7 Unit (in this example: millimeter)
8 Backwards movement of the cursor to the beginning of the line (Carriage
return)
9 Line feed
Creating your own data format
In the file management you will find a file that you can copy to a storage medium
and then adapt it individually on a computer. Then you can copy the new file to the
file storage area of the product and assign it to a function.
Data formats are saved as XML files
146
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020