HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Page: 114 / 236

Commissioning |
OEM area
7
7.7.1 Adding documentation
You can store and display the product's documentation right on the product.
Only documents in the *.pdf file format can be added as a
documentation. The product does not display documents provided in
other file formats.
Tap
Settings
in the main menu
Tap Service
Open in the sequence
OEM area
Documentation
Add OEM service info
If required, connect a USB mass storage device (FAT32
format) to a USB port of the product
To navigate to the desired file, tap the location where the file
is stored
If you have accidentally tapped the wrong folder, you
can return to the previous folder.
Tap the file name that is displayed above the
list
Navigate to the folder containing the file
Tap the file name
Tap
Select
The file is copied to the unit’s Service info area
Further information:
"Service info", Page 184
Confirm the successful transfer with
OK
Further information: "Documentation", Page 208
Safely removing a USB mass storage device
Tap File management in the main menu
Navigate to the list of storage locations
Tap
Safely remove
The message "The storage medium can be removed now."
appears
Disconnect the USB mass storage device
7.7.2 Adding a startup screen
You can define an OEM-specific startup screen, e.g. the company name or logo,
which will be displayed when the product is switched on. An image file with the
following properties needs to be stored on the product for this purpose:
File type: PNG or JPG
Resolution: 96 ppi
Image format: 16:10 (other formats will be scaled proportionally)
Image size: Max. 1280 x 800 px
114
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020