HEIDENHAIN 548431-05, User Manual, Page: 441 / 722

ICP programming | Editing ICP contours
6
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
441
Manipulating contour elements
The control provides various ways to change an existing contour.
The procedure is illustrated in the following example of
editing
the length of an element
. The other functions work similar to the
procedure described here.
The
Manipulate
menu provides the following functions for editing
existing contour elements:
Trimming
Length element
Contour length
(only for closed contours)
Radius
Diameter
Modify
Contour element
Form element
Delete
Element/range
Move element/range as well
Contour/pocket/Figure/pattern
Form element
All form elements
Transform
Shift
a contour
Turning a contour
Mirroring a contour: You can define the position of the
mirror axis by entering the starting point and end point or the
starting point and angle