HEIDENHAIN 548431-05, User Manual, Page: 388 / 722

Teach-in | Milling cycles
5
388
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Milling direction for contour milling
Cycle type Cutting direction Direction of tool
rotation MCRC Execution
Inside (
JK
=1) Up-cut milling (
H
=0)
Mx03 Right
Inside Up-cut milling (
H
=0) Mx04 Left
Inside Climb milling ( H =1) Mx03 Left
Inside Climb milling ( H =1) Mx04 Right
Outside ( JK =2) Up-cut milling ( H =0) Mx03 Right
Outside
Up-cut milling (
H
=0)
Mx04 Left
Outside
Climb milling (
H
=1)
Mx03 Left
Outside Climb milling ( H =1) Mx04 Right
Right ( JK =2) For open contours
without function.
Machining in direc-
tion of contour
definition
Without effect Right
Left ( JK =1) For open contours
without function.
Machining in direc-
tion of contour
definition
Without effect Left