HEIDENHAIN 548431-05, User Manual, Page: 168 / 722

Machine mode of operation | Conversion into DIN format
4
168
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
4.13 Conversion into DIN format
The "Convert to DIN" function enables you to convert a Teach-in
program to a smart.Turn program with the same functionality. You
can then optimize, expand such a smart.Turn program, etc.
Making a conversion
Converting into DIN format:
Press the
Cycle program --> DIN
soft key (
main
menu )
Select the program to be converted
Press the
Cycle program --> DIN
soft key
( program selection menu )
The generated DIN program has the same program name as the
Teach-in program.
Should the control encounter any errors during conversion, it
generates an error message and cancels conversion.
If a program with the name used is open in the smart.Turn editor,
the conversion must be confirmed with the
Overwrite soft key.
The control overwrites the program that is open in the smart.Turn
editor.