HEIDELBERG Suprasetter 106, Operation

Page: 36 / 91

Operation ABC
3–6 Edition September 2005
Manual Loading of a Printing Plate
Note: You can only load a printing plate to the device
if the lower part of the two status LEDs is flashing and
the load buttons are lit. The insertion rollers first
open for you to load a printing plate. This is accompa-
nied by a brief beep.
Warning: Plate edges can be sharp. Failure to wear
protective gloves can result in injuries to your hands.
1. Put on protective gloves.
2. Take the requested printing plate from the packag-
ing.
3. Remove all slip sheets or packaging materials which
may stick to the plate.
2
Lower part is flashing
Load buttons are lit
3