HEIDELBERG Suprasetter 106, Operation

Page: 10 / 91

Before You Start ... ABC
X Edition September 2005
Warning: You may be exposed to dangerous radiation
by the invisible laser beam if you use operating or
adjustment equipment other than those mentioned
in this documentation or if you follow other working
procedures.
When carrying out work as described in the customer
documentation, the user must always adhere to the
operating process stipulated. Protection from the
invisible laser beam is ensured by covers or safety
loops.
The use of laser protection glasses is not in the plans
as correct operation eliminates the need for these.
Safety Loop
For your safety, the output device is equipped with a
safety loop. If the safety loop is interrupted, e.g. by
removing the insertion table, all mechanical motions
are stopped and the invisible laser beam is switched
off in the exposure head.
This safety system must never be bridged as otherwise
you are in danger of being injured by the invisible
laser beam, of being crushed by the optics carriage or
being fatally injured by an electric shock.
ESD Protective Measures for Prepress Systems and Users
Basics
Devices from Heidelberger Druckmaschinen AG are
resistant to electrostatic discharges (within the limits
of EN 55024:2001).
In order to protect devices and users from being
unnecessarily exposed to such discharges, we have
listed a few tips below that will help reduce the fre-
quency and intensity of the discharges.
3