HEIDELBERG PG.010.000B, User Manual, Page: 14 / 116

Before you start ...
14 Version 2019
All connectors and outlets of the service line must be easily accessible at all
times.
You must fully disconnect the Suprasetter from the power supply, for
example, in hazardous situations. To do this, use the power switch or pull out
the power connector.
Laser Safety
The laser imagesetter is a Class 1 laser product.
This means that the invisible laser radiation produced in the Suprasetter is
shielded by means of protective covers.
If used as directed, the user is never exposed to danger from the laser beam.
The laser systems used in the Suprasetter are Class 4 products (> 500 mW).
Companies servicing the equipment in Germany must appoint a laser protec-
tion officer in compliance with the Accident Prevention Regulations (BGV B2)
of the Professional Trade Association.
Note: Servicing may only be carried out by Heidelberg personnel who
have been trained by appropriate laser protection officers for this pur-
pose.
DANGER
Danger! High Voltage!
When connecting or disconnecting the power connector,
make sure that your hands are not wet. Do not pull the con-
nector by the cable. A damaged power cable can cause leak-
age currents and electric shocks. Protect the power cable
from being damaged. Never place any heavy objects upon it
and do not allow it to get jammed.
i
i