STEP 7
Junior Swing Seat (for Children 3-10 years)
STEP 8
Anchoring the swing to the ground
TAKE CARE WHEN SEATING YOUR CHILD!
THE CHILD MUST BE SECURED TO THE SEAT
IMMEDIATELY TO AVOID ANY INJURY.
STEP 5
Toddler Seat without T-Bar (for children 6-36 months)
STEP 6
Fasten the seat harness with crotch harness
To Open Harness:
To Close Harness:
To fasten push left and right hand
side clips into the harness until
they click into place.
Push
Push
Push
Pull
Push
Push
Push
Pull
To adjust the harness length,
shift the buckle up/down.
Buckle
8
9
6
11
11
IMPORTANT: For safety reasons the swing MUST be anchored into the ground and concreted.
THE CHILD MUST BE SECURELY
FASTENED TO THE SEAT WITH THE
HARNESS IMMEDIATELY TO AVOID
INJURY
6
Bottom of seat
1
1
2
Plastic
bolts
Bottom of seat
1
1
2
Plastic
bolts
1. Press the seat base around the plastic bolt down.
2. Then unscrew the plastic bolt.
TO REMOVE THE T-BAR
1. Press the seat base around the plastic
bolt down.
2. Then unscrew the plastic bolt.
3. Remove backrest and crotch harness
TO REMOVE THE BACKREST AND
CROTCH HARNESS
1. Place the crotch harness into the square hole
and tighten with the bolt.
TO ATTACH THE CROTCH HARNESS
6
Pull
Pull
Push
Push
Remove buckle, please keep
in a safe place so you can
convert the swing again.
NOTE: Please keep backrest and crotch
harness and plastic bolts in a safe place so
you can convert the swing again.
WARNING: THE CHILD MUST BE SECURELY FASTENED TO THE SEAT WITH THE HARNESS
IMMEDIATELY TO AVOID INJURY
WARNING: HARNESS MUST BE FASTENED SECURELY
AT ALL TIMES DURING USE IN THE TODDLER SEAT
Crotch Harness
Crotch Harness
WARNING: DO NOT OVER
TIGHTEN PLASTIC BOLTS