1
F1
Rope/swing
bearing
NOTE:
Should the rope come off the
rope/swing bearing during
use please replace back on top
of the rope/swing bearing.
1. Insert backrest into the circle hole of the seat and tighten with the bolt.
2. Insert the T-bar into the square hole of the seat and tighten with bolt.
TAKE CARE WHEN SEATING YOUR CHILD!
THE CHILD MUST BE SECURED TO THE SEAT
IMMEDIATELY TO AVOID ANY INJURY.
STEP 3
Toddler Seat with T-Bar (for Children 6-36 Months)
STEP 4
Fasten the seat harness attached to the seat
Bottom of seat
Plastic
bolts
8
6
7
To fasten push
left and right
hand side clips
into the harness
until they click
into place.
Push
Push
To adjust the harness length, shift
the buckle up/down.
Buckle
12
13
11
WARNING: DO NOT OVER TIGHTEN PLASTIC BOLTS
WARNING: DO NOT LEAN OR PUSH ON
THE T-BAR.
THE CHILD MUST BE SECURELY
FASTENED TO THE SEAT WITH THE
HARNESS IMMEDIATELY TO AVOID
INJURY
WARNING: HARNESS MUST BE FASTENED SECURELY
AT ALL TIMES DURING USE IN THE TODDLER SEAT
WARNING: THE CHILD MUST BE SECURELY FASTENED TO THE SEAT WITH THE HARNESS
IMMEDIATELY TO AVOID INJURY