HEBU HBS x-touch 200i, Operating Manual, Page: 46 / 167

HBS x-touch 200i
46
EN
7.6 Setting the operating mode and power level

Operating mode
HBS x-touch 200i has four different operating modes for
monopolar cutting, four for monopolar coagulation and
six for bipolar coagulation applications (for details, look
chapter 4.2). The selection of all modes takes place
according to the same principle. Touch the field
showing the operating modes. The selection menu then
opens.
The required operating modes must be selected by
touching. To save and return to the main menu, select
the "Exit" field.

Power setting
To set the required power level, touch the power display. The menu for power level selection appears.
Use the arrow keys in order to set the required power setting.
To save and return to the main menu, select the "Exit" field.
Menu example: Power setting
(MONO- CUT)
All changes are saved automatically. Even after turning off and then again turn the device on, all the
things will remain. If you want to save certain settings from being changed, you will find further
information in chapter 6.7
“Saving and accessing the programm” and chapter 6.8 “Saving the program
against changes”
Menu example: Selection of operating modes
(MONO
– CUT)