background image

7

Switching on for the first use

After switching on the heater for the first time and following extended
periods on non-use, the heater may smell for a short time.

It is normal to see two dark points on the bulb element in the following
few minutes of switching on. This is normal, and will not affect the
performance of the unit.

Attention! Do not look into the light.

Cleaning

Disconnect the heater from the power supply;

After the heater has cooled down, the housing can be wiped dry;

Do not touch the bulb element with your fingers,

The reflector should be cleaned regularly,

Do not use any abrasive or caustic cleaning agents

Never immerse the heater in water

Any maintenance or repairs should only be carried out by a qualified

electrician.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.

6

Summary of Contents for HSQH2000

Page 1: ... 2 55kG IP 65 Telephone 0117 923 5375 Fax 0117 923 5374 Victoria Road Avonmouth Bristol BS11 9DB www heatstore co uk IMPORTANT SAFEGUARDS WHEN USING ANY ELECTRICAL APPLIANCE BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE IF IN ANY DOUBT ABOUT THE INSTALLATION OR USE OF THIS PRODUCT CONSULT A COMPETENT ELECTRICIAN HSQH2000 W...

Page 2: ... supervision or instruction concerning use of the heater in a safe way and understand the hazards involved Children shall not play with the heater Important Safety Instructions WARNING In order to avoid overheating do not cover the heater WARNING FIRE RISK EXISTS IF THE HEATER IS COVERED BY OR POSITIONED CLOSE TO COMBUSTIBLE MATERIALS Use only the voltage specified on the rating plate of the heate...

Page 3: ...ral Brown Live WARNING The mains lead is made from high temperature cable and as such should not be replaced without consulting a suitable qualified electrician The fitting must be earthed 4 Installation The HSQH2000 Heater is supplied with 1 8m pre fitted cable and all the required fixings in the box see figure 2 Fixings supplied 3 x ST4 35 screws 3 x wall plugs 2 x M6 14 bolts and butterfly nuts ...

Page 4: ...fingers The reflector should be cleaned regularly Do not use any abrasive or caustic cleaning agents Never immerse the heater in water Any maintenance or repairs should only be carried out by a qualified electrician Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU To prevent possible harm to the environme...

Reviews: