background image

 Installation and Operating Instructions

Downflow Fan Heater Model : HS2000T  

(IP22)

08/54400/0     Issue 1

IMPORTANT SAFETY ADVICE
This appliance can be used by children 

aged from 8 years and above and 

persons with reduced physical, sensory or 

mental capabilities or lack of experience 

or knowledge if they have been given 

supervision or instruction concerning the 

use of the appliance in a safe way and 

understand the hazards involved. Children 

shall not play with the appliance. Cleaning 

and user maintenance shall not be made 

by children without supervision. Children 

of less than 3 years should be kept away 

unless continuously supervised. Children 

aged from 3 years and less than 8 years 

shall only switch on/off the appliance 

provided that it has been placed or installed 

in its intended normal operating position 

and they have been given supervision 

or instruction concerning the use of the 

appliance in a safe way and understand 

the hazards involved. Children aged from 3 

years and less than 8 years shall not plug in, 

regulate and clean the appliance or perform 

user maintenance.
CAUTION: 

Some parts of this product can become 

very hot and cause burns. Particular 

attention has to be given where children 

and vulnerable people are present.
WARNING:  

This heater is not equipped with a device 

to control room temperature. Do not use 

this heater in small rooms when they are 

occupied by persons not capable of leaving 

the room on their own, unless constant 

supervision is provided.
WARNING:  

Do not operate the heater with the top 

cover removed. This could trip the fuselink. 

This heater must not be operated without 

the cover correctly in position.

This heater carries the warning symbol 

indicating that it must not be covered.

WARNING: 

In order to avoid a hazard due to 

inadvertent resetting of the thermal cut-

out, this appliance must not be supplied 

through an external switching device, such 

as a timer, or connected to a circuit that is 

regularly switched on and off by the utility.
DO NOT place the heater directly below a 

fixed socket outlet.
DO NOT place aerosols or other containers 

susceptible to heat in the direct airflow 

from the unit.
DO NOT use the heater in the immediate 

surroundings of a bath, a shower or a 

swimming pool.
IMPORTANT: 

This heater must be installed so that the 

switches and other controls cannot be 

touched by a person in the bath or shower.
WARNING: Disconnect the heater from 

the electricity supply before undertaking 

service or repair.
WARNING: 

If the appliance is fitted in a bathroom, 

a cable outlet will be necessary with the 

supply to the unit controlled by a double 

pole switch. The switch if inside the 

bathroom should be pull cord operated 

and if outside should be adjacent to the 

entrance door. The appliance must be 

mounted so that no part of it can be 

touched by any person using bath or 

shower.
DO NOT cover the appliance or place 

material or garments on it, or obstruct the 

air circulation around this appliance, for 

example with curtains or furniture, as this 

could cause over heating and a fire risk.
WARNING: The supply circuit to the heater 

must incorporate a double pole isolating 

switch having a contact separation of at 

least 3mm.
This product is only suitable for well 

insulated spaces or occasional use.

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Summary of Contents for HS2000T

Page 1: ... fuselink This heater must not be operated without the cover correctly in position This heater carries the warning symbol indicating that it must not be covered WARNING In order to avoid a hazard due to inadvertent resetting of the thermal cut out this appliance must not be supplied through an external switching device such as a timer or connected to a circuit that is regularly switched on and off...

Page 2: ...n in accordance with the latest IEE wiring regulations Before undertaking installation work ensure the electricity supply is disconnected from any relevant fixed wiring The supply circuit must be adequate for the input of the appliance and must be protected with a 13A fuse A suitable termination to the fixed wiring of the premises must be provided adjacent to the final position of the appliance th...

Page 3: ...g of the element Use a vacuum cleaner to remove any fluff which does accumulate Fig 2 NOTE If the operation of the product has been stopped during a runback period then switched back on the runback timer will revert back to the maximum 30 minute duration The heater can be switched on or off via the pull cord operation The heater comes pre programmed with a 30 minute runback timer At the end of the...

Page 4: ...ty is valid for Heatstore from the date of purchase of your Heatstore product from a recognised retailer in the country of purchase and use or the date of delivery of the product if later always provided the original receipt has been retained and is produced as proof of purchase You must provide to Heatstore or its authorised agents on request the original receipt as proof of purchase and if requi...

Reviews: