3
208153-01
GLASS GLOBE INSTALLATION
IMPORTANT:
Before mounting glass globe assembly to the
fixture, secure glass globe to globe housing.
1. Locate glass globe hardware pack and remove hardware.
2. Be sure glass globe is inside globe housing.
3. Place brackets on edge of globe housing and secure to
housing with included screws.
4. Set glass globe assembly aside until light fixture is
installed.
Glass Mounting Screw
Glass Mounting Bracket
FINIAL INSTALLATION
1. Remove the finial from the hardware pack.
2. Securely tighten the finial to the bottom of the globe
housing.
Finial
Globe Housing
Ground Screw
Mounting
Plate
LIGHT FIXTURE INSTALLATION
For best performance, mount the fixture about 6 feet (1.8 m)
above the ground.
1. Remove two decorative nuts.
2. Remove mounting plate.
3. Tighten mounting screws finger tight.
4. Set sensitivity control on back of fixture to MIN
position.
5. Attach mounting plate to junction box.
Decorative Nut
Mounting Screw
Bracket
Mounting
Screws
Junction
Box
Note:
We recommend having an assistant help hold the
lantern assembly during the wiring process.
MAX
SENS
MIN
Mounting Bracket
