Heath Zenith 7352 Page 1 Quick Start Manual Download

Page: 1 / 6

Wireless

Home Alert Kit

Install Wireless Chime

Plug in wireless chime. IMPORTANT: To
avoid resetting chime memory, wait 30
seconds before pressing the push button
or the “TEST” button inside the sensor. See
Troubleshooting, Problem 3 if chime memory
was accidentally reset.

Figure 1

WARNING: To prevent possible

SERIOUS INJURY or DEATH:

• NEVER allow small children near

batteries.

• If battery is swallowed, immediately

notify doctor.

Model 7352

Wireless

plug-in

chime

Door sensor with battery,

Door magnet, Magnet spacer

Wireless

push button

Hardware

pack

✔

(x2)

✔

Important considerations: The sensor must be mounted to the door jamb. The
magnet should be attached to the door. Sensor is for indoor use only.

This package includes (Style of door sensor, push button, and chime may vary
from illustration):

Chime Volume Control

Access Door (See Tune

Settings or Troubleshooting)

Summary of Contents for 7352







Search results

Summary of Contents for 7352

Reviews:

Related manuals for 7352

Brands by name

Popular brands

Heath Zenith 7352, Quick Start Manual

Search results

Summary of Contents for 7352

Reviews:

Related manuals for 7352

Brands by name

Popular brands