Heath Consultants RMLD User Manual Download Page 10 | Manualshive

Page: 10 / 38

Heath Consultants RMLD User Manual Download Page 10

Page 10 of 36

101515-0 RMLD MANUAL REV

F

Transceiver

The transceiver provides the laser launch for the infrared detection beam, visible green
spotter laser, and spotter laser button. Harness hooks are provided to allow the unit to be
suspended from the harness.

Carrying Strap

The RMLD is provided with a single carrying strap with shoulder pad. An optional dual
strap harness is also available.

Battery Charger

The battery charger is provided to recharge the instrument after use. The charger is a
universal 110 - 240 VAC, 50 / 60 hertz with charger indicator. Adaptors are provided to
convert the style plug for different types of receptacles.

Instruction CD

The Instruction CD contains the following items:

1. Instruction Manual that provides instructions on the uses and operation of the

instrument.

2. Training Video that illustrates proper use and techniques to fully utilize the

instrument.

3. Additional

HEATH

product information.

4. HEATH contact information.

Carrying Case

The carrying case provides protection for the instrument during storage or transportation.
The instrument should be kept in the case while not in use. Integrated into the carrying
case is a calibration gas cell.

Headphone

Allows the operator to listen to the audible tones through a headphone instead of the
external speaker.

«
...
8
9
10
11
12
...
»

Summary of Contents for RMLD







































Reviews:

No comments