Control
S. 59
10.2.3.6
Notifications
The
heatapp!
system sends push and e-mail messages in the event of faults or service notifications.
Push messages are system notifications, which the
heatapp! base
sends directly to the user interface of the mobile device
(smartphone / tablet), so that the user is immediately informed. These may be fault messages or service notifications.
E-mail addresses that are to be used for the sending of automatic push messages can be saved under the "
Notifications
" menu
item. These e-mail addresses can likewise be offered as possible distribution addresses when sending the establishment protocol.
Tap on the desired users to specify which individual users are to receive the notifications.
Tap button
to return to the "
System
" menu.
10.2.3.7
Setup wizard
The "
Setup wizard
" menu item relaunches the setup wizard. This may be for example be due to a move and changed connection
to the boiler.
10.2.3.8
System management
In the "
System management
" area, you can update the
heatapp!
system software and perform a data backup.
Updating the system software
EbV works constantly to improve the
heatapp!
system. To ensure our customers can benefit from this, we have developed an
update system, which means you are always offered the latest version.
You decide whether you want to install the offered update or would prefer to retain the existing version.
A display appears below the current software indicating whether a software update is available.
Note
If you are connected to the local network, the app sends you a message if an update is available for your heatapp! system. Read
also “The Homescreen” chapter on page 36.
Software updates are only displayed, if the
heatapp!
system is connected to the Internet.
If you perform a software update of the
heatapp! base
, please check whether the new software is compatible with the
software of the
heatapp! gateway
.
If necessary you may also need to perform a software update for the
heatapp! gateway
. When updating the device software by
downloading via the Internet additional costs may be charged depending on the customer's actual Internet tariff.
Restart system now
The "
Restart system now
" button triggers a restart.
Note
Restarting
heatapp! base
deletes “Live View” saved data.
Reset to factory settings
The "
Reset now
" button, resets the device to the factory settings.